Vinyl Application Tips

FOR THE BEST RESULTS
Clean the area well. Alcohol does wonders! Make sure the vehicle hasn’t been sitting in the sun or too hot to the touch. (Unless using wet application method.)

GET IT ON STRAIGHT

You can use a piece of masking tape or blue painters tape to make a straight line under (or over) where your Jeep Name will go, to help you line it up straight.

THERE IS NO RE-APPLYING

You got ONE shot, so make sure it is EXACTLY where you want it BEFORE the sticky backing of the Vinyl touches your vehicle. It will not come back off without stretching it or destroying it. 

WET APPLICATION

You can spray some (slightly soapy) water on the area first if you want. Then you will be able to adjust the decal bit to get it straight. Just make sure you use the included plastic squeegee to scrape ALL the water out, and allow it to dry a bit before peeling. Peel slowly, if any parts of the decal move or don't stick to your vehicle, keep repeating the process.

See an example of
wet application in the video below.

Video Tips

Pro Tip

Applying your decal straight & exactly where you want it

Transfer/Peeling from Backer Paper

Getting your decal onto the transfer paper

Wet Application

Allows for a bit of repositioning.

Get Behind-the-Scenes

@iconic_jeep

JEEP NAME - T-REX

JEEP NAME - PHOENIX

JEEP NAME - BORDER RAT

JEEP NAME - STORMBREAKER

JEEP HOOD DECAL - SUPERMAN 3D

JEEP HOOD DECAL - PHOENIX/RAVEN

ORACAL 851 GLITTER SPARKLE

ORACAL 851 GLITTER SPARKLE

GRAPHIC DESIGN

Wave at Us

Share by: